Ding, S., Jiang, Z., Hodgson, P.D. and Duncan, J.L., (2010). Millipede Forming – A new metal forming approach, Baosteel BAC, Shanghai, China, pp. C109-C114.
Ding, S.C. and Duncan, J.L., (2010). Innovative alternatives to roll forming, BTC2010, Invited Keynotes.
Ding, S., Daniel, W.J.T., Yuan, J. and Zhang, Y., (2011). Making roll forming Flexible - Introduction to Chain Forming, Yokohama Tube & Pipe 2011, Osaka, Japan.
Chao Voon Lim, S., Zhang, K., Bettles, C., Davies, C. and Wu, X., (2012). Towards the Improvement of forged Billet and Product – Evaluating Cast and Forged Billet Microstructure, BAJC Annual Conference, Brisbane, Australia.
Chen, J., Jak, E. and Hayes, P.C., (2012). Reducing CO2 emissions and increased productivity from the iron blast furnace through improved understanding of the phase chemistry and reactions in iron ore sintering systems, BAJC Annual Conference, Brisbane, Australia.
Cheng, X., Jiang, Z.Y., Wei, D.B., Hao, L., Zhao, J.W., Peng, J., Lu, S. and Jiang, L.Z., (2012). Effect of water vapor on oxidation of ferritic stainless steel 445J1M in simulated reheating environment, BAJC Annual Conference, Brisbane, Australia.
Ding, S. and Zhang, Y., (2012). Chain-die Forming, is it a right forming method to make structural parts of motor vehicles with UHSS material, The 2012 International Conference on Advanced Vehicle Technologies and Integration (VTI2012), Changchun, China.
Dou, S., Yamini, S.A., Li, S., Jood, P., Lia, Z., Peleckis, G. and Zhang, C., (2012). Waste Heat Recovery at Steel Works using Thermoelectric Materials, BAJC Annual Conference, Brisbane, Australia.
Ferry, M., (2012). Direct strip casting of metals and alloys and Production and properties of amorphous metals, Short Courses to Baosteel Talent Development Institute, Shanghai, China.
Gentle, I., Zeng, Q. and Wang, D.-W., (2012). Carbon-Sulfur Core-Shell Composites for Li-S Batteries, BAJC Annual Conference, Brisbane, Australia.
Hao, L., Cheng, X., Peng, J., Wei, D.B. and Jiang, Z.Y., (2012). Study on deformation behaviors of oscillation marks in hot rolling of stainless steels, BAJC Annual Conference, Brisbane, Australia.
Hoffman, M. and Vodenitcharova, T., (2012). Design of Truss-core Sandwich Panels: Elastic Bending Behaviour, BAJC Annual Conference, Brisbane, Australia.
Jiang, Z.Y., Wei, D.B., Cheng, X.W., Hao, L. and Zhao, J.W., (2012). Control strategies of surface quality of stainless steels, BAJC Annual Conference, Brisbane, Australia.
Konarova, M., Beltramini, J., Lu, M., Chen, J., Wang, G. and Rudolph, V., (2012). Nano and Microscale Engineering of MoS2-based Catalyst for Syngas to Ethanol Conversion, BAJC Annual Conference, Brisbane, Australia.
Qian, M., Yan, M., Yu, P. and Yan, Y.F., (2012). Towards the Fabrication of Low-cost, Pore-free, High-performance Titanium Components in Near Net Shapes, BAJC Annual Conference, Brisbane, Australia.
Wu, Y., Liu, Z., Simon, G.P. and Li, D., (2012). Scalable Production of Graphene-Based Bulk Nanomaterials for Advanced Energy Storage, BAJC Annual Conference, Brisbane, Australia.
Xia, X., Birbilis, N., Davies, C.H.J. and Nie, J.F., (2012). Composition effects on the corrosion of aluminium-free magnesium alloys, Proc. Conf. Corrosion And Prevention'12 (ACA), Melbourne, Australia, p. 142.
Xu, W., (2012). Investigation of crack formation processes during strip casting of low carbon steel, Baosteel Strip Casting Team, Shanghai, China.
Xu, W., Wu, J., Wang, X., Fang, Y., Yu, Y., Quadir, Z., Laws, K. and Ferry, M., (2012). Mechanisms of crack formation in twin roll cast carbon steel sheet, BAJC Annual Conference, Brisbane, Australia.
Yu, A.B., Kuang, S.B. and Hou, Q.F., (2012). Modeling and analysis of ironmaking processes for improving energy efficiency in Baosteel, BAJC Annual Conference, Brisbane Australia.
Yuan, J., W., D. and Ding, S., (2012). An exploratory study of making structural parts of motor vehicles by Chain-die Forming, The 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, Australia.
Zhang, Y. and Ding, S., (2012). A comparison study of chain-die forming and roll forming by forming a top hat section, Steel Research International, Krakow, Poland, pp. 703-706.
Zhang, Y. and Ding, S., (2012). Experimental study on Chain-die Forming for Ultrahigh Strength Steel (UHSS), The 15th International Conference on Advances in Materials & Processing Technologies, Wollongong, Australia.
Zhang, Y. and Ding, S., (2012). A study of forming a right-angled channel section in one pass by Chain-die Forming, Steel Research International. Wiley, Krakow, Poland, pp. 399-402.
Cheng, X., Jiang, Z.Y., Wei, D.B., Hao, L., Zhao, J.W., Peng, J., Lu, S. and Jiang, L.Z., (2013). The effect of water vapour on oxide scale of ferritic stainless steels at high temperature, Baosteel Biennial Academic Conference, Shanghai, China.
Cui, Y.R., Wang, L., Yang, J., Zhang, J., Sasaki, Y. and Ostrovski, O., (2013). Development of Environmentally Friendly Fluoride-free Mould Flux for Steel Continuous Casting, 2013 International Sustainability Symposium, Sydney, Australia.
De Jong, B., (2013). Gleeble 3500 conducted research projects at the University of Wollongong Australia, Baosteel Biennial Conference, Shanghai, China.
Ferry, M., (2013). The application of 3D-EBSD in the study of deformed and annealed metals, The 5th Baosteel Biennial Academic Conference, Shanghai, China.
Hou, Q.F., Dong, K.J., Zhao, X.Y., Li, J. and Yu, A.B., (2013). Study of the solid flow in systems with screw feeder by discrete element method, The 5th Baosteel Biennial Academic Conference, Shanghai, China.
Jiang, Z.Y., Wei, D.B., Cheng, X.W., Hao, L. and Zhao, J.W., (2013). 445J1M sticking mechanism and technical solutions, Seminar of Baosteel, Shanghai, China.
Kiet, T., Qiang, Z., Hongtao, Z. and Cheng, L., (2013). A study of oxidation and wear on high speed steel roll material, BaoSteel Biennial Conference, Shanghai, China.
Li, H., Su, L., Lu, C. and Barbaro, F., (2013). Evaluation of centreline segregation in continuously cast line pipe steels, The 5th Baosteel Biennial Academic Conference, Shanghai, China.
Nie, J.F., (2013). Precipitation and solute segregation in magnesium alloys, International Workshop on Processing-Microstructure-Mechanical Properties of Magnesium Alloys, Madrid, Spain.
Su, L., Li, H., Lu, C., Simpson, I., Barbaro, F., Fletcher, L., Zheng, L., Bai, M., Shen, J., Xu, G. and Gui, G., (2013). Review on the evaluation of centreline segregation in continuously cast line pipe steels, The 6th International Pipeline Technology Conference: "A better view of pipeline technology", Ostend, Belgium.
Wu, C.H., Zhang, L.C., Li, S.Q., Jiang, Z.L. and Qu, P.L., (2013). Three-dimensional Simulation of Mixed Lubrication in Metal Strip Rolling, The 5th Baosteel Biennial Academic Conference, Shanghai, China.
Xu, W., (2013). Designing a high‐strength strip‐cast low alloyed low carbon steel, Technical Presentation to Baosteel Strip Casting Team, Shanghai, China.
Xu, W., (2013). EBSD and its applications, Short Course to Baosteel Talent Development Institute, Shanghai, China.
Yu, X.L., Jiang, Z.Y., Wei, D.B. and Zhou, C., (2013). Thickness-dependent phase evolution of oxide scale studied by high temperature x-ray diffraction (HTXRD) (invited talk), The 5th Baosteel Biennial Academic Conference, Shanghai, China.
Zeng, Z.R., Birbilis, N., Davies, C.H.J. and Nie, J.F., (2013). Development of highly formable micro-alloyed Mg sheet and alloys, International Workshop on Processing-Microstructure-Mechanical Properties of Magnesium Alloys, Madrid, Spain.
Zhang, K., Wu, X., Bettles, C., Davies, C. and Huang, A., (2013). Effects of Processing Parameters on Macrozone Formation in Ti-6Al-4V Alloy, TMS 2013 conference, San Antonio, USA.
Zhu, H.T., Zhu, Q., Kosasih, P.B., Zamri, W.F.H. and Tieu, A.K., (2013). Mechanical properties of oxide scale on a high speed steel roll material surface, BaoSteel Biennial Conference, Shanghai, China.
Chen, C., Zhang, T., Donelson, R., Chu, D., Tan, T. and Li, S., (2014). Thermoelectric properties of Na0.8Co1-xFeXO2 ceramic prepared by spark plasma sintering, The 38th ICACC Conference Proceedings.
Cheng, X., Jiang, Z.Y., Wei, D.B., Zhao, J.W., Hao, L., Peng, J., Luo, M., Luo, S. and Jiang, L., (2014). Effects of high temperature on oxidation behavior of ferritic stainless steels in humid air, The 2nd BAJC Conference, Melbourne, Australia.
Cui, Y.R., Wang, L., Yang, J., Zhang, J., Sasaki, Y. and Ostrovski, O., (2014). Phase Equilibria in Boracic Mould Fluxes for Steel Continuous Casting, The 2nd Australia-China Joint Symposium on Minerals and Metallurgy, Sydney, Australia.
Cui, Y.R., Wang, L., Yang, J., Zhang, J., Sasaki, Y. and Ostrovski, O., (2014). Equilibrium Phase Calculation and Composition Design for Fluoride-free Boracic Mould Fluxes for Steel Continuous Casting, The 2nd BAJC Conference 2014, Melbourne, Australia.
Hao, L., Jiang, Z.Y., Wei, D.B., Zhao, J.W., Cheng, X. and Luo, M., (2014). Study on anti-scuffing capacity of extreme pressure agents for high speed steel material, The 2nd BAJC Conference, Melbourne, Australia.
Hou, Q.F., Dong, K.J. and Yu, A.B., (2014). Modelling the flow of cohesive solids in reduction shaft of COREX, The 2nd BAJC Annual Conference, Melbourne, Australia.
Hou, Q.F., Li, J. and Yu, A.B., (2014). Multiscale modeling of thermal-chemical behaviors in COREX, The 2nd Australia-China Joint Symposium on Minerals and Metallurgy, Sydney, Australia.
Jang, K., Ma, X., Wu, S., Zhu, J., Wang, G. and Zhao, B., (2014). Phase Equilibria in 'FeO'-CaO-SiO2-Al2O3-MgO System Related to Iron Blast Furnace Slag, BAJC Conference, Melbourne, Australia.
Jiang, Z.Y., Wei, D.B., Zhao, J.W., Cheng, X., Hao, L. and Luo, M., (2014). Study on surface quality of stainless steels, The 2nd BAJC Conference, Melbourne, Australia.
Kabir, R., Tian, R., Wang, D., Donelson, R., Tan, T. and Li, S., (2014). Effects of sintering temperature on thermoelectric properties of nanocrystalline Ca0.9Yb0.1MnO3 prepared by co-precipitation method, The 38th ICACC Conference Proceedings.
Konarova, M., Tang, F., Beltramini, J., Chen, J., Wang, G. and Rudolph, V., (2014). Design of MoS2-based Catalyst for Syngas to alcohols, TOCAT -7, Kyoto, Japan.
Kong, N., Tieu, K., Zhu, H. and Zhu, Q., (2014). Tribological behaviour of ultra low carbon steel coated with solid lubricant in ferritic temperature range, The 19th Intl. Colloqium Tribology. Paper ID 9.7, Stuttgart Germany.
Lazo, N., Vodenitcharova, T. and Hoffman, M., (2014). Design of low-density bio-inspired structures, The 1st BAJC Conference, Melbourne, Australia.
Li, H., Su, L., Lu, C., Barbaro, F., Fletcher, L., Zheng, L., Bai, M., Shen, J., Xu, G. and Gui, G., (2014). Automatic measurement of centreline segregation in continuously cast line pipe steel slabs, Energy Materials, Xi'an, Shanxi Province, China.
Li, H., Su, L., Lu, C., Barbaro, F., Fletcher, L., Zheng, L., Bai, M., Shen, J., Xu, G. and Gui, G., (2014). Significance, Measurement and Control of centreline segregation in continuously cast line pipe steels, The 2nd BAJC Conference, Melbourne, Australia.
Li, Z. and Dou, S.X., (2014). Advanced Copper Chalcogenide Nanostructures for Thermoelectrics, BAJC annual conference, Melbourne, Australia.
Ma, X., Wu, S., Zhu, J., Wang, G. and Zhao, B., (2014). Phase equilibria in the CaO-SiO2-Al2O3-MgO system related to iron blast furnace slag, High Temperature Processing Symposium, Melbourne, Australia, pp. 90-92.
Ma, X., Wu, S., Zhu, J., Zhao, B. and Wang, G., (2014). Behaviours of Baosteel Iron Ores in Cohesive Zone of Blast Furnace, The 2nd Australia-China Joint Symposium on Minerals and Metallurgy, Sydney, Australia.
Shen, Y.S. and Yu, A.B., (2014). CFD study of preheated coal injection in ironmaking blast furnaces, Chemeca, Perth, Australia.
Shen, Y.S., Yu, A.B., Zhao, X.Y. and Mao, X.M., (2014). Process modelling and analysis of iron-making processes for improving energy efficiency in Baosteel: Modelling and applications of pulverized coal injection in blast furnace, The 2nd BAJC Annual Conference, Melbourne, Australia.
Tian, R. and Li, S., (2014). Enhancement of thermoelectric properties of Ca3Co4O9 based oxides (Invited), The 38th International Conference and Expo on Advanced Ceramics and Composites, Florida, US.
Vodenitcharova, T. and Hoffman, M., (2014). Hybrid composite metal laminates with designed cores for high manufacturability, The 1st BAJC Conference, Melbourne, Australia.
Wang, L., Cui, Y.R., Yang, J., Zhang, C., Cai, D., Zhang, J., Sasaki, Y. and Ostrovski, O., (2014). Melting Properties and Viscosity of SiO2-CaO-Al2O3-B2O3 system, The 2nd Australia-China Joint Symposium on Minerals and Metallurgy, Sydney, Australia.
Wu, C.H., Zhang, L.C., Li, S.Q., Jiang, Z.L. and Qu, P.L., (2014). Effect of Asperity Plastic Deformation on the Interface Friction in Metal Forming, The 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications, Kaohsiung, Taiwan.
Yang, J., Cui, Y.R., Wang, L., Sasaki, Y., Zhang, J., Ostrovski, O. and Kashiwaya, Y., (2014). Investigation of Crystallisation Behaviour of Mould Flux Using Hot Thermocouple Technique, The 2nd Australia-China Joint Symposium on Minerals and Metallurgy, Sydney, Australia.
Yang, J., Wang, L., Cui, Y.R., Zhang, J., Sasaki, Y. and Ostrovski, O., (2014). A Study of Physicochemical Properties and Crystallisation Behaviour of Fluoride-free Mould Fluxes for Steel Continuous Casting, The 2nd BAJC Conference, Melbourne, Australia.
Yu, A.B., Kuang, S.B., Li, Z.Y., Shen, Y.S., Hou, Q.F., Samman, M., Mao, X.M., Zhao, X.Y. and Li, J., (2014). Process modelling and analysis of iron-making processes for improving energy efficiency in Baosteel, The 2nd BAJC Annual Conference, Melbourne, Australia.
Zeng, Z.R., Bian, M.Z., Birbilis, N., Davies, C.H.J. and Nie, J.F., (2014). Evolution of Texture in Cold-Rolled Magnesium Alloys during Annealing above Recrystallization Temperature, The 8th International Conference on Advanced Materials Processing, Gold Coast, Australia.